SV08 Corner Purge Bin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Max Capacity Corner Purge Bin designed to work with the Goose Belt Purger System Mod I have uploaded for the SV08
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 135
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
This is a Max Capacity Filament Purge Bin to be used with the Adapted Goose Belt Purger System I made for the SV08.
Can be Used for any other purging system as well with kicking filament waste from the bed. Stock Bin works great for a AT BoxTurtle AFC set up with kicking enabled for waste removal.
Step files are uploaded if anyone wanted to make it longer in length. I find it unnecessary myself as I've used this bin with models over 500 color changes with no issue with my adapted Goose Belt Purger System
Recommended Print Settings
Material: ABS or ASA (PLA will NOT work so close to the Heated Bed)
Orientation: Already set by file orientation
Walls/Perimeters: 4
Top/Bottom Layers: 5
Infill: 30-40% (TPMS-D or Gyroid recommended).
Scaling/Shrinkage: Print at 100% scale. USE shrinkage compensation
Supports: Needed