SV08 Gantry Purge and Nozzle Wiping Mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
SV08 Goose Belt Purger System adaption mod to allow for Gantry Purging and nozzle wiping with no z movements
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 30
- Wydruki
- 1
- Wyświetlenia
- 626
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
SV08 Goose Belt Purger System adaption mod to allow for Gantry Purging and nozzle wiping with no z movements needed when color changing.
This mod allows for fitting the GBP (Goose Belt Purger) to the SV08 with the minimal amount of bed/Z height Loss, with a much Stronger and Stiff Mounting system because the SV08 is a Standard printer with not a lot of variation from factory I was able to remove the width adjustment from the mounting system and make it a UniBody Mount.
Please Check out my others SV08 Posts. I was able to shave off 20secs from each color change with my box turtle with this Mod along with my other posted SV08 mods. I was also able to have better purges and save filament after tuning the system.
For all help related to what I altered to fit the SV08 post a comment or DM me. Any help related to the GBP system itself please go to the GBP GitHub and/or Discord (I am also there)
With this mod you save alot of time with color changes but comes with a 12-20mm Z build height loss. This can be fixed by adding a Top Hat to your SV08 and gain back the loss and then some. Totally worth it IMO.
BOM and Build Instructions For Purge System
Please Go to the GitHub/Printables page for GBP for the full BOM, Not included STLs and Instructions. As well as check out their Discord for help with install.
List of major parts.
1x Silicone wristband (12 mm wide, 200 mm circumference)
1x DC motor, 6V/12V, 15rpm N20 Motor
3x 623 bearings
2x 6x3mm magnets
1x Bambu A1 Brush
List of NOT included STLs (Im not posting what i didn't modify)
GBP_Frame
GBP_Arm
GBP_Motor_cover (I posted a modded M3 Button Head instead of Socket Head)
GBP_Motor_pulley
GBP_Idler
GBP_Bearing_spacer
https://github.com/Graylag-PD/Goose-Belt-Purger/tree/main
BOM For Bed Spacers
6x M4x40mm SHCS (12-15mm Spacer)
6x M4x45mm SHCS (20mm Spacer)
Recommended Print Settings
Material: ABS or ASA (PLA will NOT work for very long)
Orientation: Already set by file orientation
Walls/Perimeters: 5
Top/Bottom Layers: 5
Infill: 30-40% (TPMS-D or Gyroid recommended).
Scaling/Shrinkage: Print at 100% scale. USE shrinkage compensation (For ABS/ASA)
Supports: Needed For UniBody Only
Huge credit to the GBP Creator and ArmoredTurtle Creators ( AT supplied mounting for GBP system and AT nozzle wiper)