Bosch MFQ36490 kitchen blender part
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Repair part for the Bosch MFQ36490 hand mixer-blender.
- Ocena
- 4 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 1
- Wyświetlenia
- 46
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
If a part of your Bosch MFQ36490 hand mixer blender has broken, this may come in handy.
In my case, the coupling (connector) of the immersion blender attachment broke and no longer stayed secured in the mixer.
To replace this part, follow these steps:
1. Remove the old connector. I heated it up and cut it apart.
2. Take the printed parts. There will be two spacers. Attach them to the metal base near the small groove using glue. Before that, clean the area of dirt to ensure better adhesion.
3. Insert the metal part with the spacers into the new holder. It is also recommended to secure it with glue.
I will leave the Fusion 360 project file in case you need to make changes or want to improve this model.