1 / 1
Reverse-P Pickguard for Fender/Squier P-Bass — zdjęcie 1

Reverse-P Pickguard for Fender/Squier P-Bass

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Want to change to a Reverse-P but don't want to buy a new pickguard?

Ocena
0 / 5
Polubienia
5
Pobrania
34
Wydruki
0
Wyświetlenia
168
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Music
Licencja
Creative Commons — Attribution — Noncommercial

Changed to Reverse P and also changed to single volume, no tone control. Changed the split location to hide better.

If you use this pickguard you'll need to route the body for the new pickup location for the D and G strings. Best way to do this is to install the pick guard, mark the pickup cavity, and then route (or drill and chisel) out slightly larger than needed. 

Print with the visible side on the bed so it has a more uniform textured finish. 

I've included the normal three-hole tail option as well as a single piece pickguard with two and three holes if you have a printer large enough. 

Tagi