Vex Mecanum Wheel Adapter for Rover 5 Chassis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed an adapter for the Vex mecanum wheels to fit on the Rover 5 chassis by Dagu. Couldn't find any but found…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 656
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
Needed an adapter for the Vex mecanum wheels to fit on the Rover 5 chassis by Dagu. Couldn't find any but found LucasOchoa's adapter to Tetrix (https://www.thingiverse.com/thing:534346), so created this remix.
Uses the original metal collar from the Rover 5 kit, 1x M3x16 Hex screw, and 7x M3x25 Hex screws (all per wheel). Wheels need to have their center hole drilled out to fit the 4mm shaft of the chassis.
Here's a video of me showing the design off and mounting the wheels on the chassis: https://www.youtube.com/watch?v=y7cVpPPPRFk
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2S
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
10%
Filament: Rigid.ink PLA While
Notes:
Hub piece was printed in Prusa Copper PLA.rnrnNo mirrored parts included, will instead need to be done in your preferred slicer.
Category: Robotics