1 / 3
Pelican Kayak mount plate for Watersnake ASP trolling motor — zdjęcie 1
1 / 3

Pelican Kayak mount plate for Watersnake ASP trolling motor

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Stiffens up the hull on a Pelican 120SE recreational kayak to mount your Watersnake ASP trolling motor mount.

Ocena
0 / 5
Polubienia
1
Wydruki
0
Wyświetlenia
168
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

I added a Watersnake 12v trolling motor to my Pelican Ultimate 120SE kayak. The hull is somewhat thin, so I designed this mount to keep the mount from flexing in place. It is held in place by the 4 watersnake mounting bolts, and I added 2 holes for stainless M12 bolts (overkill for sure, but what I had in the workshop), and added 3m marine adhesive to seal the holes and hold the mount. 

There is a DXF file for a washer plate that I used to sandwich the mounts inside the hull, and get minimal flex using this on the water, even in choppy conditions.  I used ABS sheet material, but you could laser cut (or jigsaw) from marine grade 1/8" plywood. 

May fit other similar kayaks. If you want to check fit, Ive included a file in the images so you can print and cut a paper template to make sure everything works well before purchasing.  Print 1:1, check that the square measures 1" to ensure accuracy. 

Also check out my accessories for this system available here on Printables. 

Recommended print settings for .4 nozzle in PETG:

5 walls
30% infill
12 Tottom layers
10 Top layers
Gyroid infill 

Printed on my Prusa Core One+ printer, get one for yourself with our referral link

Tagi