Pelican Kayak mount plate for Watersnake ASP trolling motor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stiffens up the hull on a Pelican 120SE recreational kayak to mount your Watersnake ASP trolling motor mount.
- Rating
- 0 / 5
- Likes
- 1
- Makes
- 0
- Views
- 168
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Standard Digital File License
I added a Watersnake 12v trolling motor to my Pelican Ultimate 120SE kayak. The hull is somewhat thin, so I designed this mount to keep the mount from flexing in place. It is held in place by the 4 watersnake mounting bolts, and I added 2 holes for stainless M12 bolts (overkill for sure, but what I had in the workshop), and added 3m marine adhesive to seal the holes and hold the mount.
There is a DXF file for a washer plate that I used to sandwich the mounts inside the hull, and get minimal flex using this on the water, even in choppy conditions. I used ABS sheet material, but you could laser cut (or jigsaw) from marine grade 1/8" plywood.
May fit other similar kayaks. If you want to check fit, Ive included a file in the images so you can print and cut a paper template to make sure everything works well before purchasing. Print 1:1, check that the square measures 1" to ensure accuracy.
Also check out my accessories for this system available here on Printables.
Recommended print settings for .4 nozzle in PETG:
5 walls
30% infill
12 Tottom layers
10 Top layers
Gyroid infill
Printed on my Prusa Core One+ printer, get one for yourself with our referral link