"Commercial Chef" Food Dehydrator to Filament Dryer Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Convert your "Commercial Chef" food dehydrator into a filament dryer
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
I heard years ago that you could use a food dehydrator as a filament dryer. I had wanted a food dehydrator for food purposes for years, and so knowing I could use it for 3D printing pushed me over the edge to buy a cheap one off Amazon. Although most people suggested cutting the grates out of the trays, I wanted to keep the trays intact for food dehydrating purposes. So, I instead designed this! A simple cylindrical insert that is compatible with the food dehydrator trays.
The food dehydrator I bought and designed this part for is a "Commercial Chef" model. I'm sure it's a white-label model sold under many brands, so it's worth noting the inner diameter of the base is approximately 235mm.
To Print
Orient the part such that the wider opening is on the print bed. The narrower opening has slopes to make it possible to print without supports. It is recommended to print with concentric top and bottom surface infill. There is a small section where it transitions from wide to narrow that uses infill, but the rest will likely be solid, depending on perimeters and nozzle size.
It's recommended to print this in PETG or ABS to tolerate the heat of the dehydrator.
To Use
Stack one of the original trays on the base - this provides a platform for the filament spool without blocking airflow
Stack the printed part on top of the tray - make sure to align the slots
Place the filament spool inside the dehydrator
Place the original lid on top of the printed part - it will be a snug fit