1 / 6
Printable XhuPont / XH2.54 / DuPont connectors (V2) — zdjęcie 1
1 / 6

Printable XhuPont / XH2.54 / DuPont connectors (V2)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Custom pin counts, cable-mount XH2.54 sockets, and more! (Now including dual-row DuPont connectors.)

Ocena
5 / 5
Polubienia
980
Pobrania
1266
Wydruki
2
Wyświetlenia
7799
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

I don't charge for my functional models. Please consider purchasing some of my paid models as a way to support both my work, and this great website: https://www.printables.com/@ninjamida/store


NOTE: An issue has been identified with the pin seperation of the XH2.54 connectors. Basically - despite the common name, they're not actually 2.54mm, just often mislabelled as such. This shouldn't matter for connectors with a small number of pins (up to 5 or so) but may become an issue with larger connectors. I am working on a new version.

Printable XH2.54 and DuPont connectors:

  • DuPont connector

  • DuPont connector with screw tabs (M3 screw)

  • DuPont connector dual-row

  • XH2.54 connector

  • XH2.54 socket

  • XhuPont connector (XH2.54 connector using DuPont female pins)

  • XhuPont socket (XH2.54 socket using DuPont male pins)

  • XhuPont socket with vertical screw tabs (M3 screw)

  • XhuPont socket with flat screw tabs (M3 screw)

STL files provided for:

  • Single row DuPont: 1 to 10 pins

  • Dual row DuPont: 4 to 20 pins, plus 40 pins

  • All others: 2 to 10 pins

Parametric FreeCAD source file also provided; you can generally change the pin count safely but modify anything else at your own risk. So yeah, you could make a 100-pin DuPont connector with this if you want. I don't know why you would, but hey, you can.

Print setup (printed on a Flashforge AD5X):

  • Print in ABS. (You can try other materials, but you may need to make adjustments to the model.)

  • Smooth build plate.

  • Make sure you've calibrated your shrinkage and flow ratio!

  • 0.25mm or smaller nozzle. (My older version - XH2.54 only - can be printed on a .4 nozzle.)

  • Orient as in the STL files

  • Layer height 0.1mm (exception: 0.127mm for DuPont Dual-Row). First layer height may be doubled if desired on the XH2.54 and XhuPont connectors (but not DuPont).

  • Random seam positions OR use scarf joints.

  • Classic wall generator

  • 1 wall loop

  • External bridge infill direction 180 (make sure this is aligned to the model) - exception, use 90 for the XH2.54 socket

  • All speeds (except travel) 15mm/s; you can go faster if you're printing several of them (it's mostly so that the layers can cool) but keep accelerations lowish

  • Manual normal-snug supports, on build plate only - exception, use manual tree supports for the XH2.54 socket and XhuPont socket

  • No brim

  • To give layers time to cool, it is strongly recommended to print at least three connectors at a time.

See image for where to paint supports. For the XhuPont with flat screw tabs, supports are also needed underneath the screw tabs.

The XH2.54 plug and DuPont plug should be suitable as drop-in replacements for legit ones. The XH2.54 socket is only really useful as a starting point for remixing.

XhuPont, aside from allowing for situations like "I normally only use DuPont but I just need a one-off XH2.54", is also useful because it fills a gap in the XH2.54 standard - cable or wall-mounted (rather than PCB-mounted) sockets. See the last two photos, which demonstrate some real-world cases where I've used these (same device, at different stages of building and from different sides).

With the DuPont and XhuPont connectors, it is beneficial to push the tab in a bit once the pin is inserted. Using one of the ridges on a Phillips head screwdriver works really well for this. If you want to be extra safe, use some glue, but it generally isn't necessary.

Tagi