Volvo Center Console Bowl Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A tray to hold a bowl on the center console of a 2012-2016 V70 or XC70
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 54
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A bowl holder for Volvo V70 or XC70 , looks like it will fit most 2012-2016 models.
The tray clamps onto both sides of the center console, and holds a 11.5 cm diameter Wildo Kasa bowl.
STL's are oriented correctly for printing, and I have included Fusion and Step files to adapt this to any other car or bowl.
Do not print in PLA! Use PETG or similar so it can survive in a hot car.
Required supplies
6x M4 threaded inserts 3.9mm deep
6x M4x10 socket head screws
2x M5 hex nuts
2x M5x40mm thumbscrews
Instructions
Print parts in provided orientation ( Note: Tray L needs supports! )
Superglue or heat-weld tray L and tray R.
Install M4 threaded inserts, make sure they don't protrude.
Push the hex nuts into the rectangular holes of the clamp bodies.
Screw the clamp bodies onto the tray's threaded inserts.
Insert the thumbscrews through the clamp faces and screw them into the hex nuts.
Tighten thumbscrews to clamp onto the back edge of the center console.