Bedside Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Perfect bedside lamp
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 29
- Wydruki
- 1
- Wyświetlenia
- 116
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
2 Piece bedside lamp.
I used colourless eSun petg for the lampshade and black eSun pla for the base.
Layer height: 0.15mm but 0.2mm is probably fine
Infill: 15% but this does not really matter
Walls: 3 walls to ensure the lampshade is solid
Supports: No supports
Print orientation: Base was printed upright. Lampshade was printed upside down to avoid supports
Seams: Use random seams to avoid an ugly line from going up the side of the lampshade
To connect the base and the lampshade I used 3mmx3mm magnets. The prints need to be paused at the right time to add the magnets then resume the prints to close the magnets in. While putting the magnets in make sure that the magnets are all facing the same way and that they are aligned in such a way that the base and lampshade will attract eachother.
To attach the led to the base I used the provided double sided tape patch
I used a fake bambulab light kit from Aliexpress however I am sure that the real kit will work as they are a complete copy.
Links to magnets and Light kit: