1 / 22
Elite Liquid Series cover - fan-shaped hexa perforation — zdjęcie 1
1 / 22

Elite Liquid Series cover - fan-shaped hexa perforation

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Pump cover with fan-shaped perforation. Optical effect depending on the point of view. Clips optimized for 3D printing.

Ocena
0 / 5
Polubienia
3
Pobrania
5
Wydruki
0
Wyświetlenia
103
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Share Alike

First, I had to reconstruct the basic shell of the cover. I left the edges sharp in my version. Then I added the top part with many holes that fan out in all directions. Thanks to this, you can see a different portion of the inner cover from different sides (see photos).

There are 2 versions of the model in the files bellow:
  1. With clips as they where on the original model (90deg overhang). Not ideal for 3D printing, but printable (even without supports).

  2. With clips optimized for 3D printing (65deg overhang).

Printing:

Print this upside down (clips up). No supports. I used PLA Fillamentum Crystal Clear Iceland Blue and it came out great. I recommend printing with transparent material.

 

Tagi