1 / 3
ODT-26 CK62 new case for cheap mechanical keyboard — zdjęcie 1
1 / 3

ODT-26 CK62 new case for cheap mechanical keyboard

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

WIP retro-inspired ODT-26 keyboard case. Case parts require gluing with included pegs; PCB standoffs are separate and gl

Ocena
0 / 5
Polubienia
2
Pobrania
2
Wydruki
0
Wyświetlenia
60
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

Description

This project is still a work in progress, so some assembly steps currently require manual fitting and gluing.

Included Files

  • Main Case Parts

    • Split case sections that form the outer shell of the ODT-26.

    • Designed to be assembled together using the included alignment pegs.

  • Alignment Pegs

    • Small connector pegs used to align and join the case sections.

    • These should be glued into place during assembly.

  • PCB Standoffs

    • Separate printable standoffs for mounting the PCB.

    • These are intentionally separate pieces and need to be glued into the case manually after test fitting the PCB.

  • Additional/Variant Files (if included)

    • Alternate versions or test parts used during development.

    • Some files may change in future revisions as the project evolves.

Assembly Notes

  • The case is not snap-fit at the moment.

  • Use the included pegs to align the case sections and glue them together.

  • PCB standoffs are provided as separate parts and must also be glued into position manually.

  • It is strongly recommended to:

    1. Test fit the PCB first

    2. Verify alignment

    3. Then glue the standoffs in place

  • Because this is still an evolving design, minor sanding, fitting, or adjustments may be required depending on printer tolerances.

Status

This is an early public release / WIP version of the project. Future revisions may include:

  • integrated standoffs

  • improved mounting solutions

  • easier assembly

  • cleaner internal tolerances

Feedback and remixes are welcome.

Keycaps found here:
https://makerworld.com/pl/models/494997-dots-low-profile-keycap-set-mechanical-keyboard?from=search#profileId-409047

Tagi