1 / 8
Tanleki Emulator adapter, Keeper (QR1 / QR1 Lite — zdjęcie 1
1 / 8

Tanleki Emulator adapter, Keeper (QR1 / QR1 Lite

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Compatibility: Universal fit for both the newer "Round Head" and original "Flat Head" Tanleki Tiny Emulators.

Ocena
0 / 5
Polubienia
3
Pobrania
4
Wydruki
0
Wyświetlenia
63
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Universal Tanleki Emulator Keeper (QR1 / QR1 Lite Remix)

Credits & Inspiration

This project is a remix and simplification of the QR2 Tanleki Emulator Keeper. Huge thanks to the original creator for the initial concept! This version has been redesigned from the ground up to fit the QR1 system and features adjusted alignments and tolerances for a more universal fit.

Technical Specifications

  • Compatibility: Universal fit for both the newer "Round Head" and original "Flat Head" Tanleki Tiny Emulators.

  • Fitment: Verified for Fanatec QR1 and QR1 Lite.

  • Design: The emulator neck seats inside the keeper, which is then sandwiched against the internal QR lip.

  • Precision Clearance: Limits emulator travel to between 0.2 mm and 0.4 mm. This creates a near-zero play environment, ensuring the data pins stay fully seated in the wheelbase to prevent disconnects.

  • Extraction Port: Integrated M5 threaded hole.

    • Model Diameter: 5.8 mm (Oversized specifically for easy, tool-free hand-threading).

    • Thread Pitch: 0.8

    • Effective Depth: 5.0 mm

    • Design Intent: Allows for quick extraction using a standard M5 bolt as a temporary handle.

Print Settings

  • Orientation: Print thread-side down for maximum accuracy.

  • Supports: Tree Supports (Highly recommended; they are the easiest to remove and keep the cavity clean).

  • Walls: 4–5 Wall Loops (Ensures the internal threads are solid for pulling).

  • Material: PLA or PETG.

  • Infill: Standard values (15-25%) are sufficient.

Usage Instructions

  • Installation: Slide the keeper into the QR cavity over the emulator neck.

  • Removal: Thread any M5 bolt into the center hole by hand and pull the part out.

  • Note: Remove the bolt before racing. The M5 screw is a tool for extraction only; leaving it in could result in it rattling loose into your rig.

Tagi