IKEA BAGGANÄS installation template
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Installation template for precise and consistent installation of multiple Ikea BAGGANÄS 355 handles for PAX wardrobe
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 107
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Public Domain
A laser friendly installation template for the Ikea handle, for installing multiple handles at the exact same position.
Requirements
- Laser level
- Self Centering drill bit
- 5 mm Drill bit
Instructions
Set the laser height to the desired centered height. In my case, as there is already a window door, provided with a handle, the center of this handle is used.
Position the template as displayed, use the laser to set the correct height, and check that the 2 notches are in contact with the edge of the door.
Drill the pilot holes with a self centering bit.
Remove the template, open the doors (to avoid drilling into any installed accessory) and drill the final whole with a 5 mm drill bit using the pilot holes.
Printing Instructions
Use a PrusaXL to print in one, or split the design for non XL printers. Use default settings, no supports, any material should do.