1 / 1
Prusa CORE One/+ MMU3 Y-Splitter - M10 to 2x M6
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Had some extra M10 connectors so I figured I could just adapt it to this one..
- Ocena
- 3,5 / 5
- Polubienia
- 3
- Pobrania
- 24
- Wydruki
- 2
- Wyświetlenia
- 211
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (14)Powiązane
This model allows you to connect both the MMU3 and the side-loaded filament paths to the extruder without manual changes.
This uses one M10 PTFE connector and two M6 PTFE adapters.
Print standing up as in the STL, I used PETG and it's been great.