1 / 4
RAK WisMesh Tag Charging Dock - Dual Slot Edition
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A charging sled that can charge two WisMesh Tags at once.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 167
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
A charging sled that can charge two WisMesh Tags at once. Both cables initially enter through the same hole, then split off to the sides. If you needed to charge more than two, you theoretically could pretty easily chop this up into more and beef up the cable channels to ensure there's enough room. Stick some non-skid rubber things to the bottom and print with high infill for that premium feel. The cable securer thing should just snap in and hold tight if tolerances are good.