working glider (laser cut)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is a little plane I made. It will fly pretty well if you position the wings right. I recommend testing positions with tape before gluing them together. You can also get an idea of where to put the wings from the pictures.
When testing the wing positions: throw it straight, and if it points up and then stalls, move the wings toward the tail (back). If it points down and crashes into the ground the second you throw it, move the wings forward. Once it flies straight, glue the wings on and put the tail pieces like in the picture.
I used Elmers glue to glue it together. Make sure the wings are lined up to the fuselage, the thick point in the middle of the wing should be glued to the fuselage.
To find out how to put the tissue paper on the wing, go here:
Covering a Model Airplane in Tissue : 6 Steps (with Pictures) - Instructables