Liczymy pasujące modele…
Great tool for launching gliders, rockets, and other things. Many other people have had issues with hitting their fingers when launching so here is the solution. 5.5g of filament and 17 min print on Bambu printers. The design was made so…
Local ikea was out of stock of the Vidga Gliders with hooks https://www.ikea.com/us/en/p/vidga-glider-with-hook-white-20483002/ . 3D designed replacements. Recommended to print on side with supports as this allows for stronger prints.
This is an adapter to fit extended gliders on the back feet of a Stokke Tripp Trapp chair. The locking mechanism was inspired from the great design by JonsBronnu ( https://www.thingiverse.com/thing:1429208 ). The main difference is that…
Stokke sells for their Tripp Trapp high chair Extended Gliders for more stability. They are recommended by Stokke when using the Baby and Newborn Sets and are also helpful to prevent the chair from tripping over backwards when the child…
Some simple pads or “gliders” for mounting under the legs of chairs and other kinds of furniture . Once installed, these pads/gliders: make moving chairs, tables and sofas a breeze, protect sensitive floors from scratches by your…
A 3 peice control horn for RC planes & gliders so you dont have to wait for Amazon! :) This model can be printed in about four minutes on my Ender 3 All of my models are free but please consider supporting me on Buy Me A Coffee!…
Only 2 meters of filament required, which is a quarter of what you get for posting a make on Printables! No tuning required. Flys 60 to 100 feet. Works with almost every filament! 100% infill, supports on build plate only. Rubber band…
I created this for my stressless chair after noticing that only paid options were available. If your chair resembles the one in the photo, the gliders are likely to fit. There are two on each side, making a total of four for a single…
Printing tips Print the gliders' base with high infill (60-80%) because it also acts as a balancing weight. Use variable layer height and print the curved bottom surface as low layer height as your printer reliably can. 0.12mm will do,…
Printed with 0.1mm layer hight from ABS. Use an m3 screw to fasten the endstop on the slider. Be carefull with the screw tightening, couse it can break the gliders stop. Category: Automotive
I had a bunch of computer mice that I opened for switch replacement and their old feet (gliders, sliders, skates) were damaged. So, time to use the printer and print new ones ! There are 3 sets of pads here, matching the following brands…
Just the Ozone paragliders logo. Print instructions Category: 3D Printing Summary Just the Ozone paragliders logo.
A simple tool for field assembly of all RC models that take nylon M6 screws to hold its parts together. Designed for my Multiplex Lentus for attaching horizontal stabilizer. Small size makes it ideal to leave in transmitter case to have…
Micro Gliders Pack. Minimalist and Ultra Lightweight. A collection of two unique hand launch micro gliders designed for quick printing and pure fun. Perfect for burning through those last meters of filament on your spool or testing your…
I printed the original in 1.2x the size same for these arms i printed them 1.2x so the added files is in the original shape. Use some stearin from candle to lubricate the dow and the original parts
Might also work with normal curtains
If you're like me you hate having velcro on the back of your phone because it sticks to everything and damages your pants if you carry your phone in your pockets. It's tougher than you might think, it survived the abuse of the 2024 X-Pyr…
Use this instead of a maxi glider hook to use your curtains with the Xiaomi Curtain Companion . Simply hook the curtain companion into the hole and then loop your curtains onto the hook. Prints nicely out of any material at any layer…
Print it in tpu. Shopping list: Connectors 1.25 mm JST 2 Pin https://amzn.eu/d/7O5Od5k Step-up 0.9-5V To 5V DC-DC https://amzn.eu/d/2N1EUCR Lipo 1S 3.7V 300mAh https://amzn.eu/d/7Odt2Ar v02.test: v0.1 test:
this is a Set of Curtain Stops for 5mm glider Rails, you can clip your last hanger in, it will hold in place and not fall out
The original rubber pegs have worn out on the chair. These gliders prevent the chair from scratching the floor. Open Source & Public Domain - free forever, no strings attached. Source
Practical stands for the CoreOne. The stand without a switch can be mounted on any corner of the CoreOne. The stand with a switch is available in two versions: left/right. For feet with a switch, an additional M3x10-20 screw with nut is…
I stretched out the servo arm cover and scalled it to fit a short servo arm of a 9 grams servo, using Orca Slicer. Very light and low profile. Put it in gliders I use for dynamic soaring. In the picture of my JW60 the proportion is as the…
Gliders for Ikea Havsta living room table, i printed them fully in PETG and they work like a charm. Just pressfit printed without any supports with 0.2 mm SPEED profile. I just used black SUNLU PETG.
I use large IKEA SAMLA boxes for storage under my bed. When I pull them out or push them back, I often scratch my floor covering. I have created a way to attach felt glides or fabric to the boxes. You can either stick the blocks under the…
The countertop in our kitchen was too high for the maximum height of the original feet. For this reason, I designed feet with an interlocking fit so that they stay in place when the dishwasher is slid in, ensuring they don’t get lost.…
A simple tool for field assembly of all RC models that take nylon M6 screws to hold its parts together. Designed for my Multiplex Lentus for attaching horizontal stabilizer. Small size makes it ideal to leave in transmitter case to have…
I use large IKEA SAMLA boxes for storage under my bed. When I pull them out or push them back, I often scratch my floor covering. I have created a way to attach felt glides or fabric to the boxes. You can either stick the blocks under the…
The original rubber pegs have worn out on the chair. These gliders prevent the chair from scratching the floor. Open Source & Public Domain - free forever, no strings attached. Source
Some simple pads or “gliders” for mounting under the legs of chairs and other kinds of furniture . Once installed, these pads/gliders: make moving chairs, tables and sofas a breeze, protect sensitive floors from scratches by your…
Note : For better durability and improved load support, it’s recommended to print with 100% infill .
See this wikipedia page for an introducing to Game of Life and gliders. This is purely a decorative design for Life enthusiasts, but it is east to print and use if you have silicone and epoxy resin. You can find a more detailed…
Furniture gliders, when you broke or lost these Ikea parts don't have the time to wait for internet... 100% infill. depending on screws / nails, one have deeper holes....
Parts IKEA 115418 and insert in glass door itself Printed in transparent ABS-T (test print in white PLA) Printing instructions turn your temperature a little bit higher for better layer adhesion, print with very fine layer height as this…
After an unsuccesfull attempt in recreating the original rollers, I went with a trapezoidal form, which makes them glide neatly.
Print it lying on the honeycomb pattern without supports. Put PTFE-tubes into the holes for spools to turn easier. You can use less infill for the spool-zylinder, but use more infill for the foot to stand stable. The holder is for…
This will help to get our Samla boxes from under furniture if you have also carpet blocking the normal 'feet' of the box. Best results with PETG and thin layer heights.
Remix of the amazing wing by Tom Stanton but with the airfoil SD7037
Version 1 The Havsta desk comes with rubber feeds that won't glide on wooden floors. I have created this snap-on caps. These can be pressed onto the feeds and don't need glue. You can stick felt gliders with a diameter of 22mm on the…
When using curtain wires (ie IKEA Dignitet) with curtains with loops, these get easily stuck and don't glide very well on the wire. These gliders slip onto the wire and into the loops. They have a little hook to stay on the wire and the…
