Wago 221-Series Universal Mounting Adapters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Universal Mounting Adapters for Wago 221 Clamps (3 & 5 terminals)
- Ocena
- 2 / 5
- Polubienia
- 8
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 227
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Different Mountingholders for the Wago 221-Series (3 & 5 terminals). The clamps get pushed in the holder, while opening the clamps is still possible. The 3 terminal holders are intended to be used for 1wire AC connection (Line, Neutral, PE), while the 5 terminal holders are intended to be used for DC distribution.
There are different mounting options (vertical & horizontal) - dependend on the individual need. The holders can be screwed with M3 screws from the front- and backside. In case the holders can be mounted from the backside, short M3 Heatinserts (link) are needed. There is also a version where self-cutting screws can be used (diameter of hole: D2.8mm). Dimensions are marked in the pictures.
For easy cable management, holes were designed in the holders.
Print settings:
quality: normal print quality
infill: 20%
print direction: same for all holders --> see pictures
supports: no supports needed
If other holders are needed (e.g. 2 terminal clamp), let me know and I will update the models.
Cheers and happy printing!