Wago 221-Series Universal Mounting Adapters
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Universal Mounting Adapters for Wago 221 Clamps (3 & 5 terminals)
- Rating
- 2 / 5
- Likes
- 8
- Downloads
- 47
- Makes
- 0
- Views
- 227
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Different Mountingholders for the Wago 221-Series (3 & 5 terminals). The clamps get pushed in the holder, while opening the clamps is still possible. The 3 terminal holders are intended to be used for 1wire AC connection (Line, Neutral, PE), while the 5 terminal holders are intended to be used for DC distribution.
There are different mounting options (vertical & horizontal) - dependend on the individual need. The holders can be screwed with M3 screws from the front- and backside. In case the holders can be mounted from the backside, short M3 Heatinserts (link) are needed. There is also a version where self-cutting screws can be used (diameter of hole: D2.8mm). Dimensions are marked in the pictures.
For easy cable management, holes were designed in the holders.
Print settings:
quality: normal print quality
infill: 20%
print direction: same for all holders --> see pictures
supports: no supports needed
If other holders are needed (e.g. 2 terminal clamp), let me know and I will update the models.
Cheers and happy printing!