1 / 6
RC Sailboat - Racing Sparrow Footy 305 3D — zdjęcie 1
1 / 6

RC Sailboat - Racing Sparrow Footy 305 3D

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A small, 3D printable RC sailboat that’s quick to build, low cost, and delivers fun, responsive sailing on the water.

Ocena
5 / 5
Polubienia
17
Wydruki
1
Wyświetlenia
479
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Standard Digital File License

The Racing Sparrow RS Footy is a 305mm long 3D printed radio controlled model sailboat designed for fun, simplicity, and low-cost sailing.

Built around the popular Footy class, this compact boat is easy to print, quick to assemble, and surprisingly capable on the water. Despite its small size, the RS Footy sails beautifully and offers a responsive, enjoyable experience in a wide range of conditions.

Google Racing Sparrow for loads of photos and information or visit our website:
https://racingsparrow.co.nz

It is a 2-channel radio controlled model which sails just like a full size yacht.

Whether you're new to 3D printing or an experienced maker, the RS Footy is designed to go together quickly with minimal complexity, making it perfect for first builds, quick projects, or group builds.

Go sailing with the RS Footy, a small boat that delivers big fun.


Comes with:
Hull parts
Keel and Bulb Parts
Rudder Parts
Rigging Parts
Build Stand
Instructions / Online Build Guide
Logo file for sail

Please note, all STLs are compressed into 1 zip file. When you purchase there are many separate STL files organised in folders.


To finish you will need
2 servos, receiver, battery and transmitter
Lead shot to fill keel bulb shell
Carbon rods/tubes for keel and rig
Glues
Sail material (Mylar or similar)
Various small parts from a hardware store

For a global suppliers list visit the Racing Sparrow Materials Page.


Manufacturing settings

The RS Footy is designed to be printed in PLA+. Less than 1 roll of filament is typically enough to produce the full boat including hull, keel, bulb, rudder, and rig parts.

The model has been designed so that no part exceeds 200mm on any axis, making it suitable for most home 3D printers. All parts are ready to print directly from the STL files with no additional modelling required.

No supports are needed. Any required support structures are built directly into the parts.

Example settings used on a Creality K1 Max:

Nozzle: 0.4mm
Wall count: 2
Top layers: 4
Bottom layers: 4
Brim for hull parts for adhesion
Nozzle temp: 220°C
Bed temp: 65°C
Chamber: 25–30°C
100% infill at ~200mm/s print speed


If you want a compact, affordable RC sailboat that’s quick to build and genuinely fun to sail, the RS Footy is a great place to start.

Tagi