Protective Cap for Martor Argentax No. 46144 scraper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement protective blade cover/cap, specifically designed to work with the Argentax Scraper from Martor.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
There a two problems with the original covers...
they tend to vanish magically if used regularly in work areas
they'll eventually crack and split along their sides
So that's why I remodelled the cap to use them as cheap and quick replacements.
The design is based on the cap for the Martor SCRAPEX ARGENTAX NO. 46144 scraper but it can probably also be used for other scrapers with a blade width close to 39 mm.
Notes:
to avoid splitting at the sides print the design upright
the walls are relatively thin (contact me if a beefier version is needed)
use a fairly stiff material to ensure that the cap stays on firmly