Staradventurer Polar scope Laser pointer adapter + Button press ring
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Will help you point your mount at polaris. The ring helps you press down at a button to keep the laser ON.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 55
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Use this to attach a 19mm dia Laser to polar-scope of your Skywatcher staradventurer EQ mount. the flaps(? where your laser goes) are 40mm long. there are 2 holes so you can use either a 3M or 4M screw to tighten the adapter on the scope if needed (i find it pretty snug without the screws but it might fall if your latitude is above 30-40 degs or higher, use tape to make it friction fit if needed).
Button ring uses 3M screw, Note the button on your laser might be of a different size, sand the notch to your requirement. both models made for a 19mm dia laser pointer. Friction fit design, but i used a thin double sided tape so it doesnt slide off when working with the laser. .
Tested on PLA+ and PETG, Use PETG cause the flaps(?) expand when the laser is inserted, repeated use might loosen the PLA.