Staradventurer Polar scope Laser pointer adapter + Button press ring
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Will help you point your mount at polaris. The ring helps you press down at a button to keep the laser ON.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 5
- Makes
- 0
- Views
- 56
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Use this to attach a 19mm dia Laser to polar-scope of your Skywatcher staradventurer EQ mount. the flaps(? where your laser goes) are 40mm long. there are 2 holes so you can use either a 3M or 4M screw to tighten the adapter on the scope if needed (i find it pretty snug without the screws but it might fall if your latitude is above 30-40 degs or higher, use tape to make it friction fit if needed).
Button ring uses 3M screw, Note the button on your laser might be of a different size, sand the notch to your requirement. both models made for a 19mm dia laser pointer. Friction fit design, but i used a thin double sided tape so it doesnt slide off when working with the laser. .
Tested on PLA+ and PETG, Use PETG cause the flaps(?) expand when the laser is inserted, repeated use might loosen the PLA.