Mammotion Luba 2 RTK antenna wall mount adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter for Mammotions RTK antenna. From old M42 (M40 OD) thread to M6.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 118
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
There are som many god wall mounts for the Yuka and Luba minis RTK antenna. However the design of the antenna mount has changed and I needed an adapter. This is the solution i came up with.
Bottom: M42×4 thread, 40mm OD — fits the proprietary Mammotion wall mount
Top: M6 hex counterbore + 6.5mm through-hole — for a standard M6×25–30mm bolt into the RTK station
No supports needed
Tested in PETG at 0.2mm layer height
Print settings to recommend:
Material: PETG (UV and weather resistant)
Layer height: 0.2-0.15mm (for thread quality)
Infill: 40%+
Orientation: flat side down, threads vertical — exactly as designed
Hardware needed:
1× M6×30mm hex bolt (M6×25mm also works)