Mammotion Luba 2 RTK antenna wall mount adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter for Mammotions RTK antenna. From old M42 (M40 OD) thread to M6.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 118
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
There are som many god wall mounts for the Yuka and Luba minis RTK antenna. However the design of the antenna mount has changed and I needed an adapter. This is the solution i came up with.
Bottom: M42×4 thread, 40mm OD — fits the proprietary Mammotion wall mount
Top: M6 hex counterbore + 6.5mm through-hole — for a standard M6×25–30mm bolt into the RTK station
No supports needed
Tested in PETG at 0.2mm layer height
Print settings to recommend:
Material: PETG (UV and weather resistant)
Layer height: 0.2-0.15mm (for thread quality)
Infill: 40%+
Orientation: flat side down, threads vertical — exactly as designed
Hardware needed:
1× M6×30mm hex bolt (M6×25mm also works)