iPhone 17 Camera Bump Compensator — Flat Stabilizer Pad
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small flat pad that stabilizes your iPhone 17 lying on a desk by compensating for the camera bump — no more wobbling whe
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 136
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
What it's for
On the iPhone 17, the camera module sticks out enough to make the phone wobble when laid flat on a desk — especially with a case that adds even more thickness. The result: you can't tap the screen comfortably without the phone rocking back and forth.
This small pad sits on the right side of the phone, at the same height as the camera module (which is on the left when viewed from the back), and compensates exactly for the extra thickness. The phone then rests perfectly flat and stable, ready to be used one-handed on your desk.
Specs
- Dimensions: 35 × 40 × 2 mm
- Minimal material use (~3 cm³), prints in just a few minutes
- No supports needed
- Works with iPhone 17 with or without a clear MagSafe case
Recommended print settings
- Material: PLA or PETG
- Layer height: 0.2 mm
- Top surface pattern : concentric
- Infill: 20%
- Supports: no
- Orientation: flat on the build plate
- Perimeters: 3 (for rigidity, since the part is thin)
Tips
- Matching the color to your case makes the pad nearly invisible in use.
Changelog
- v1.0 (May 2026): initial release, tested and validated on iPhone 17with a clear MagSafe case.