1 / 1
Soundbar Bracket for TCL TV and LG Soundbar — zdjęcie 1

Soundbar Bracket for TCL TV and LG Soundbar

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple set of brackets to mount an LG soundbar to a TCL TV using the existing screws and holes provided for the legs

Ocena
0 / 5
Polubienia
8
Pobrania
132
Wydruki
1
Wyświetlenia
1252
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Living Room
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

After VESA mounting my TV on the living room wall I needed a way to hang the soundbar also. I decided the best way to attach it was to print a pair of brackets that would snug fit the soundbar between them using the existing screws and holes formerly used for the legs. v4 still isn't a perfect fit with the complex geometry they felt was essential for the soundbar but they work pretty well. TV is a TCL 55" 4K HDR (2017) SB is a LG LASC47

Printed in GST3D PLA+ 

0.2mm layer height

40% gyroid infill 

4 perimeters

6 top/bottom layers 

I (or you!) may consider printing this in ABS+ or PETG if it deforms over time but so far PLA+ has done fine.

Tagi