1 / 1
Endoscope mount for BIQU H2
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed this to fit a 8mm endoscope to use as a nozzle cam.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 35
- Wydruki
- 1
- Wyświetlenia
- 487
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed this to fit a 8mm endoscope to use as a nozzle cam. It was designed to fit the fan duct by ar300500 (https://www.printables.com/prints/152635-updated-biqu-h2-dual-5015-cooling-duct). However I never used the fan duct and also never printed this mount to test it.
The idea was to clip it on the front of this fan duct with double sided tape, but I also made holes to screw it in (you would need to drill into the fan duct). Use a 3mm bolt to clamp the base and holder together.
Maybe someone could use it if it works.