1 / 2
Fishing Pole Garage Door Hanger - REV2 — zdjęcie 1
1 / 2

Fishing Pole Garage Door Hanger - REV2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remixed my original model to provide more clearance between rods using spinning reels.

Ocena
0 / 5
Polubienia
24
Pobrania
109
Wydruki
0
Wyświetlenia
515
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Garage
Licencja
Creative Commons — Attribution — Noncommercial

Introducing REV2 of my fishing rod holders

Over time we have acquired more spinning reels, the original design did not have enough clearance for those so REV2 was made.  I recommend you put the heaviest rod on the bottom for better swing actuation.

Large size model is under 300mm so you can use a wide brim on a larger printer; Medium is 252mm long so it will fit on standard sized printers with a small brim.  These print best when aligned in Y direction with my SV08 toolhead, but if you need the larger size and have a standard sized printer you can rotate the print to be diagonal on your bed.

I recommend using PETG, 3 layers, 20% gyroid infill.  I am using a 0.6mm nozzle to make these on my SV08, it gives them more strength with larger layer height and increased wall thickness.

Tagi