Tiffany-Inspired Stained Glass Pump Cover - Clear PETG + acryl marker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This design is inspired by the iconic Tiffany stained-glass lamps
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
Bring a touch of vintage elegance to your liquid cooling setup. This design is inspired by the iconic Tiffany stained-glass lamps, specifically featuring a radial mosaic pattern that transforms your AIO pump into a luminous piece of art.
The geometry is optimized to catch and diffuse the RGB lighting from the Cooler Master pump, creating a vibrant, multi-colored glow that mimics genuine leaded glass. By combining modern 3D printing with hand-painted artistry, each cover becomes a unique centerpiece for your build.
Printing Instructions
To achieve the best results and the highest level of light transparency:
Material: Transparent PETG (Clear).
Layer Height: 0.1 mm
Nozzle: Smallest diameter. I recommend 0.25
Infill: 100% or aligned rectilinear to avoid internal visible patterns.
Supports: None required (depending on your printer's bridging performance).
Post-Processing & Finishing
Preparation: Ensure the print is clean and free of oils.
Coloring: Use Acrylic Paint Markers to fill in the recessed circular and geometric segments.
Technique: The transparent PETG acts as the "glass," while the markers provide the stained effect. You can experiment with different color palettes to match your PC's specific theme.
Sealant (Optional): A quick coat of clear gloss spray can further enhance the "glass" look and protect the paint.