BIQU H2 Ender 3 V2 mounting plate with CR Touch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This remix version aims to make the extruder mount more secure
- Ocena
- 4,667 / 5
- Polubienia
- 31
- Pobrania
- 286
- Wydruki
- 4
- Wyświetlenia
- 2449
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This remix version aims to make the extruder mount more secure. I've increased the dimensions of the top bracket and added some more brackets to the bottom (v2).
On the ABL mount I've cut out a slot on the top to make the wires fit for a CR Touch. I've also made a slot along the bottom for it's cables to route through (you may also get the fan cable through there).
I've also made room for an ADXL345 sensor on the top.
My print settings using the BIQU H2:
- Nozzle temp: 240°c
- Bed temp: 80°c
- NO cooling
- Retraction distance: 0.5mm
- Retraction speed: 6mm
- Print speed: 80mm/s (40mm/s wall speed)
- Nozzle size: 0.8mm
- Layer height: 0.4mm
- Line width: 0.8mm
- Infill: 50% Gyroid
- Walls: 4
- Top/Bottom: 4
- NO supports
Update: Added V2 (18 april 2022):
Added some more supports on the bottom. Changed the cable groove to fit the thermistor and heater cables (maybe).