Wall plate adapter for 30A Tuya Zigbee switch (47mm back box)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall plate adapter for 30A 6600W Smart Switch for Boiler, Water Heater, Window Air Conditioner etc. (for 47mm back box)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Wall plate adapter for 30A 6600W Smart Switch for Boiler, Water Heater, Window Air Conditioner etc. Fits an EU/UK 47mm back box for the specific smart switch linked below. A version with a small divot is included to allow for wires to pass through if wired externally and not through walls/conduit.
https://ar.aliexpress.com/item/1005007075845664.html?gatewayAdapt=glo2ara
Mount the adapter into the wall first in the proper orientation, then the switch. There's a cut in the bottom that's supposed to face downwards to allow for removing the plate face later, once fully mounted and snapped in place.
I used 2x standard M3 Voron brass heatset inserts (4.5mm width x 4mm length) because that's what I had on hand (3mm is the actual thickness of the plate), and 2x M3x8mm BHCS to secure the switch to the plate. You can swap for any compatible hardware that you may have on hand.