Print in Place Clothesline Spreader with Wheels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clips between two clothesline ropes to keep them at a fixed distance so the lower one doesn't sag.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 1
- Wyświetlenia
- 66
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
My grandma had one at the farm in the 1940's. My mum had on at home. So, I might as well make one for myself today lol... It just keeps both sides of a clothesline on pulleys together. Otherwise, the weight of the clothing will make the line sag down.
It's printing place. So you print the wheels touching on the base plate. For more security you might want to do a little brim around the wheels themselves since it's a very small starting point.
There's tiny hidden support built in for the printing place wheel. Just turn them after printing and it will break away. You might not even notice it.
PETG or ASA Tolerate sunshine UV and weather, This being said, I'm pretty sure PLA would last at least five years.
Make it at least 3 walls 0.2mm layer height, 30% infill. Since it's printed in the strength direction and everything is curved, this should be able to hold a very heavy load on laundry in case you're extra dirty.
I'm uploading my Fusion 360 file. It's not really parametric or clean, but if anybody wants to play with that...