1 / 1
Lexus RCF 8" Factory to 8" Aftermarket speaker adapter plate — zdjęcie 1

Lexus RCF 8" Factory to 8" Aftermarket speaker adapter plate

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Originally modeled for a Focal ISU200 8" mid to go in. This spacer allows for 4 inches of backspacing of the speaker.

Ocena
0 / 5
Polubienia
0
Pobrania
8
Wydruki
0
Wyświetlenia
74
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Open Community License v1

This is a custom-designed speaker adapter plate specifically engineered for the 2015–2025 Lexus RC F. While the factory front door speakers are technically 8-inch units, their proprietary mounting pattern and shallow housing make it nearly impossible to install high-performance aftermarket drivers without a proper spacer.

This adapter was originally modeled to house the Focal ISU200 8" shallow component woofers, but it will work with various aftermarket 8-inch speakers requiring significant clearance.

To withstand the harsh environment inside a car door (heat and vibration), I recommend the following:

  • Material: ASA or PETG (Avoid PLA, as it may warp in a hot car).

  • Infill: 30% or higher (Gyroid or Grid for structural rigidity).

  • Walls: 4–5 perimeters to ensure the screw holes have plenty of "meat" to bite into.

  • Supports: Minimal supports may be needed depending on your printer's bridging capabilities.

Just fyi, what I did on installation. I applied a layer of foam gasket tape or you could also use cell foam between the adapter and the door metal. I used another ring of foam between the speaker and the adapter to prevent rattle, and everything was great.

Tagi