Mamiya C330 Lens Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A press fit lens cap for most Mamiya C330 and similar lenses.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 114
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Public Domain
Protect That Lens
This is a simple lens cap that I whipped up for the Mamiya C330 tlr. This should work with most lenses available for the C330 and C330 compatible lens assemblies. It has a friction fit so you may need to tweak it a little to get a snug but not too tight fit. It's pretty beefy for a lens cap because the rims of these lenses can get bent somewhat easily.
I printed this in PLA and it's pretty simple so you don't need any support or raft.
If you wanted to you could add a ring for a strap but this lives in the studio so I didn't bother.
Feel free to remix this into something useful to you.