1 / 1
120MM/4.7" FAN TO 4" EXHAUST DUCT ADAPTER
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Little adapter I made for a parts washer cabinet I have to go to 4" flexible duct tube.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 97
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Goes around the exhaust fan on my redline parts washer to vent to a 4" exhaust duct. In the future, I may add magnets so I can quickly disconnect it to go between my parts washer, sand blaster, and portable AC.
Printed out of ASA on Centauri Carbon. I scaled the 3MF up to account for my ASA shrinkage. The STP file is the nominal dimensions w/ some clearance.