1 / 5
Arturia Keystep 37 MkI Decksaver Dust Cover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keep the dust off of your Keystep with this handy lil guy
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 309
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
I printed these in PLA+ and glued together with super glue. The 3mf has dovetail joints I cut with .1mm tolerances. If I were to print this again I'd do it in ASA or ABS and weld it together with acetone. I used insta set to activate the super glue which worked pretty well. Still it is a little fragile when completed but seems to work fine so far. Didn't see any other models made for this so threw this together in an hour. Print three of the largest flat slats, not just the one in the file.
Happy playing with a now dust free keyboard.