1 / 5

Drybox accesories

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Few accesories for 3D printers

Aktualizacja u źródła: 31 maj 2026

Informacje o modelu

1, Make a 2cm hole in the box you want to have your adapter in (be carefull not to rip the box apart)
2, Go grab part 1 and part 2
3, Push part 2 through hole in the box
4, Push part 1 from the other side of the box and screw them together
(If your hexagons end up missaligned, just unscrew them, turn around the part 1, and screw them together again)
5,It should be looking like on picture
6, Go grap PC-4 M10 PTFE tube conectors And screw it in like its done on the picture
7,(Optional) Go grab The Funnel and screw it in place like it is shown on the picture