1 / 5
Drybox accesories
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Few accesories for 3D printers
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 32
- Makes
- 0
- Views
- 287
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
Tutorial for box adapter assembly
1, Make a 2cm hole in the boxyou want to have your adapter in(be carefull not to rip the box apart) |  |
2, Go grab part 1 and part 2 |  |
3, Push part 2 through hole in the box |  |
4, Push part 1 from the other side of the boxand screw them together |  |
(If your hexagons end up missaligned, just unscrew them, turn around the part 1, and screw them together again) |  |
5,It should be looking like on picture |  |
6, Go grap PC-4 M10 PTFE tube conectorsAnd screw it in like its done on the picture |   |
7,(Optional) Go grab The Funnel and screw it in place like it is shown on the picture |  |
Congrats, you have made it👍