Lee Holster Hanger Thigh Pad
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A high-ride thigh pad designed for the 6" Lee Holster Hanger. Works with holster hangers with 1" hole spacing.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 147
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Created in Fusion. Hole spacing is 1" and holes are 6.5mm diameter. I did mine in PLA+ since it won't spend much time in direct sunlight or a hot car but other materials should work.
Recommended Materials :
2 - 1/4"-20 screws pan-head screws,
2 - 1/4"-20 lock nuts
Optional: 4 - 1/4" internal (or external) teeth washers
Alternately, M6 can be used in place of 1/4". See comments below regarding advantage of 1/4" hardware.
Length of screw and need for lock nuts depend entirely on your spacer length between the hanger and the Y-plate. A 1" length screw will start to barely catch the Y-plate threads, 1 1/4" would catch entirely in the Y-plate threading, eliminating the need for the lock nuts.
STL and STP are below.