Lee Holster Hanger Thigh Pad
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A high-ride thigh pad designed for the 6" Lee Holster Hanger. Works with holster hangers with 1" hole spacing.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 24
- Makes
- 0
- Views
- 147
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Created in Fusion. Hole spacing is 1" and holes are 6.5mm diameter. I did mine in PLA+ since it won't spend much time in direct sunlight or a hot car but other materials should work.
Recommended Materials :
2 - 1/4"-20 screws pan-head screws,
2 - 1/4"-20 lock nuts
Optional: 4 - 1/4" internal (or external) teeth washers
Alternately, M6 can be used in place of 1/4". See comments below regarding advantage of 1/4" hardware.
Length of screw and need for lock nuts depend entirely on your spacer length between the hanger and the Y-plate. A 1" length screw will start to barely catch the Y-plate threads, 1 1/4" would catch entirely in the Y-plate threading, eliminating the need for the lock nuts.
STL and STP are below.