1 / 5
Prusa Core One + Temperature & Humidity Monitor Stand — zdjęcie 1
1 / 5

Prusa Core One + Temperature & Humidity Monitor Stand

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Core One/+ Temp and humidity gauge stand with a clear and well lit view

Ocena
4,667 / 5
Polubienia
39
Pobrania
89
Wydruki
3
Wyświetlenia
583
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Core One/+ Temp and humidity gauge stand.

Most Ive seen for the core one are sitting where you need light or get real close to read it so using two models I made a solution that is easy to view. The Thermometer / Hygrometer Stand by Extrutim as the base and the Hygrometer house for Prusa Core One by Raymond as the frame, I added 3, 3x12 N52 Magnets. The monitor now sits at the base of the core one and catches the core one light. I can now see the numbers at a glance.

The meter I used was on Amazon. Be cautious because they all show about the same dimensions but they aren't. https://a.co/d/0aWDqReW

I used organic supports and prusament petg. Use whatever supports that work the best for you. 

The magnets fit tight but you might have to use a dab of glue if you use strong magnets. 3 magnets is really overkill because it sits on the base and only needs to stay in place due to the machine vibration.

Tagi