Prusa Core One + Temperature & Humidity Monitor Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Core One/+ Temp and humidity gauge stand with a clear and well lit view
- Rating
- 4.667 / 5
- Likes
- 39
- Downloads
- 90
- Makes
- 3
- Views
- 587
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Core One/+ Temp and humidity gauge stand.
Most Ive seen for the core one are sitting where you need light or get real close to read it so using two models I made a solution that is easy to view. The Thermometer / Hygrometer Stand by Extrutim as the base and the Hygrometer house for Prusa Core One by Raymond as the frame, I added 3, 3x12 N52 Magnets. The monitor now sits at the base of the core one and catches the core one light. I can now see the numbers at a glance.
The meter I used was on Amazon. Be cautious because they all show about the same dimensions but they aren't. https://a.co/d/0aWDqReW
I used organic supports and prusament petg. Use whatever supports that work the best for you.
The magnets fit tight but you might have to use a dab of glue if you use strong magnets. 3 magnets is really overkill because it sits on the base and only needs to stay in place due to the machine vibration.