BIC Lighter Sleeves MOM & DAD | | with Break-out-support & 7 grams only!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
🔥🔥 MARK YOUR BIC-LIGHTER 🔥🔥 BIC Lighter Sleeves MOM / MUM & DAD | with integrated break-out-support & 7 grams only!
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 104
- Wydruki
- 1
- Wyświetlenia
- 256
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
🔥🔥 MARK YOUR BIC-LIGHTER 🔥🔥
BIC Lighter Sleeves MOM / MUM & DAD | with integrated break-out-support
This are easy to print sleeves (only 5 or 7 grams) for the original BIC-Lighter with already integrated break-out-support which can be removed carefully(!!!) with tweezers or similar tools, see in the pictures.
Print it slow and at a low layer height. Some Filaments (e.g. silk, matte) are more tricky due to layer adhesion.
The sleeves come in two versions, a thin (dark grey) & a slightly thicker one (grey, recommended)!
Printing recommendations:
- Material: PLA or PETG
- Speed: 30-50mm/s
- Layer Height: 0.12 - 0.16 mm
- Supports: not needed
- Brim: only w/ textured Plates
- Walls: 3-4
