HC Diana Ghost Ringing Stock Slinging
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sights and sling loop for your Diana
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 168
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Adds a decent sling mounting point and some schnazzy sights to your HC Diana. Uses three M3x10 screws, one M3x20, and you'll want to replace your solenoid screws with some sort of 8mm screws, countersunk or not. You just need a little more length for the replacement screws to bite into the solenoid housing. The sling screw loop is optional, but it should help reduce any metal on metal noise. Otherwise it's a super low hardware addition.
Sights just use regular filament, so slot in your colors of choice and a small dot of glue if you need it.
It mounts to the RMR spot, your solenoid, as well as mounting through the rear backstrap screw, I typically start with one of the solenoid screws with the sight off kilter, remove the second solenoid screw so that way you always keep one screw in and rotate the sight into position, and then install everything else.