1 / 7
No-Spill Desiccant Holder for SpacePi X4
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Much improved model which won't spill or fall off the door while in use.
- Ocena
- 4,8 / 5
- Polubienia
- 24
- Pobrania
- 139
- Wydruki
- 9
- Wyświetlenia
- 722
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 9) (Komentarze: 34)Remiksy (1)Kolekcje (58)Powiązane
Remixed to remove the poorly fitting prone-to-spilling door, reinforce, make more printable, and add a slot for using a funnel and a sliding lid - most of the small AMS desiccant holder/pod lids and funnels work, I tested with the Darkhorse one specifically.
I printed the holder in PC, 0.2mm, 3 walls, 15% infill, printing SLOW, supports on only critical regions.
Feet were printed (slightly oversized) in TPU to prevent the holder falling off the lid when tilted. 0.2mm, 2 walls, 15% infill.
Enjoy!