1 / 8
Zeiss Topogon 25mm f4 Objektivdeckel; lens cap, Contax Nikon — zdjęcie 1
1 / 8

Zeiss Topogon 25mm f4 Objektivdeckel; lens cap, Contax Nikon

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Zeiss Topogon 25mm f4 Objektivdeckel; lens cap, Contax Nikon

Ocena
5 / 5
Polubienia
1
Pobrania
4
Wydruki
1
Wyświetlenia
50
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Objektivdeckel für das Zeiss Contax Topogon 25mm f4 in verschiedenen Ausführungen.

Mit M55 x 0,75 Gewinde zum Schrauben mit oder ohne den Namen.
Mit drei Schlitzen als Klemmdeckel mit oder ohne den Namen.
Mit etwas Übermaß, damit man es innen mit Velour auskleiden kann - ähnlich der originalen Deckel. Mit oder ohne den Namen.

Je nach verwendetem Drucker, dessen Einstellungen und verwendetem Filament kann eine Skalierung des Durchmessers um +/- 0,1 mm, oder mehr oder weniger, notwendig sein.

Beim Gewindedeckel den Teil mit Gewinde mit möglichst niedriger Layerhöhe drucken und Gewinde von Nähten sauber putzen.
...................................
Lens caps for the Zeiss Contax Topogon 25mm f4 in various designs.

With an M55 x 0.75 screw thread, with or without the lens name.
With three slots as a snap-on cap, with or without the lens name.
With a slight oversize to allow for lining with velour – similar to the original caps. With or without the lens name.

Depending on the printer used, its settings, and the filament, a diameter adjustment of +/- 0.1 mm or more or less may be necessary.

For the threaded cap, print the threaded part with the lowest possible layer height and clean the threads of any seams.

Tagi