BIC Lighter Sleeves MINE / YOURS / NOT-YOURS | with Break-out-support & 7 grams only!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
🔥🔥 MARK YOUR BIC-LIGHTER 🔥🔥 BIC Lighter Sleeves MINE / YOURS / NOT-YOURS | with Break-out-support & 7 grams only!
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 195
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Share Alike
🔥🔥 MARK YOUR BIC-LIGHTER 🔥🔥
BIC Lighter Sleeves MINE / YOURS / NOT-YOURS | with break-out-support & 7 grams only!
This are easy to print sleeves (only 5 or 7 grams) for the original BIC-Lighter with already integrated break-out-support which can be removed carefully(!!!) with tweezers or similar tools, see in the pictures.
Print it slow and at a low layer height. Some Filaments (e.g. silk, matte) are more tricky due to layer adhesion.
The sleeves come in two versions, a thin (dark grey) & a slightly thicker one (grey, recommended)!

Printing recommendations:
- Material: PLA or PETG
- Speed: 30-50mm/s
- Layer Height: 0.12 - 0.16 mm
- Supports: not needed
- Brim: only w/ textured Plates
- Walls: 3-4

